Richmond Hill based · Repairs, not replacements
Roof repairs done right, right here in Richmond Hill.
We repair roofs and nothing else distracts us. From wind-blown shingles in new subdivisions to hidden flat-roof leaks, our local crew finds the true cause with thermal imaging, fixes it fast, and backs every repair with a written warranty.
Repair is the specialty
One trade, every roof system.
Shingle, slate-profile and low-slope membrane frequently meet on the same Richmond Hill roof — and leaks start where they meet.
Most companies are comfortable with one of those and guess at the rest. We work all three daily, which is why we can tell you whether a stain came from a lifted shingle course, a failed transition detail, or a seam that opened three metres away.
Field experience
15 yrs
Hands-on repair work across shingle, slate-profile and low-slope roofs — not a sales office.
Diagnosis
Infrared
Thermography maps trapped moisture and separates condensation from a genuine breach.
Systems we repair
SBS · EPDM · TPO
Plus asphalt shingle and synthetic slate. Repairs matched to the system, never mixed.
Every repair
Warranted
Written workmanship warranty, water-tested, with photo documentation of the finished work.
What sets us apart
Most roofing companies sell replacements. We diagnose and repair.
A replacement quote takes ten minutes and no diagnosis. Finding the one failed detail causing your leak takes experience — and it's the difference between a few hundred dollars and a five-figure tear-off.
Shingle systems
Nail-line placement, seal-strip bonding, valley detailing, ridge and hip vent terminations. We read the failure pattern to tell wind damage from an installation defect — which matters if a builder warranty is still in play.
Low-slope membranes
SBS modified bitumen, EPDM and TPO. Seam separation, blistering, shrinkage at terminations, and the difference between a repairable membrane and one that's past its service life.
Penetrations & flashing
Chimneys, skylight curbs, plumbing stacks, vents and parapet walls. Most of the leaks we trace start at a penetration, not in the open field of the roof.
Moisture diagnosis
Infrared scanning plus attic-side inspection. Interior condensation from poor ventilation looks exactly like a roof leak from inside. Repairing the wrong one costs you twice.
Why the camera matters
A wet ceiling is rarely under the hole that caused it.
Water enters at one point and travels along sheathing, trusses and insulation before it shows up inside. That's why guessing at the stain usually produces a second call-back.
An infrared scan reads temperature difference across the roof surface. Saturated insulation holds heat differently from dry insulation, so trapped moisture appears as a defined shape rather than a hunch. It maps how far the water has spread — something no visual inspection can do.
Once the entry point is confirmed we repair the cause: the lifted shingle course, the open seam, the failed flashing collar. Then we water-test it before we leave.
Book a thermal inspectionWhat we repair
Roof repairs for Richmond Hill homes and buildings.
Sloped & residential
Asphalt shingle homes, subdivision and estate builds.
- Shingle roof repairBlow-offs, curling, cracked tabs
- Roof leak repairTraced by infrared
- Chimney flashing & mortarThe most common entry point
- Skylight repair & resealCurb, flashing, glazing seal
- Emergency tarping & repairStorm and wind damage
Flat & commercial
Modified bitumen, EPDM, TPO and low-slope sections.
- Flat roof repairSeams, blisters, membrane splits
- Ponding water correctionDrainage and slope build-up
- Flashing & parapet detailWall terminations, counter-flashing
- Drain & scupper repairClogged, cracked or lifting collars
- Commercial emergency responseMinimal downtime
From first call to final check
How a repair actually runs.
-
01
Inspection and thermal scan
We walk the roof, scan it with infrared, and identify the true entry point rather than the visible stain. You get the findings in plain language and a fixed written price before anyone starts.
-
02
Repair with matched materials
The repair is built with products compatible with your existing system and rated for Richmond Hill's freeze-thaw cycling. Most residential leak repairs finish in a single visit.
-
03
Water test, photos, warranty
We verify the repair, photograph the completed work, and issue your warranty document. If the leak returns within the term, we come back at no charge.
Our standards
Committed to accuracy, safety, and a repair that holds.
Documented before and after
Every repair is photographed from the roof, so you see exactly what was wrong and exactly what was done — without climbing a ladder.
Materials matched to the system
SBS to SBS, EPDM to EPDM. Mixing incompatible products is the fastest way to turn one repair into two.
Written workmanship warranty
Scope, materials and warranty term are on the invoice before work starts. No verbal promises.
Fully insured, WSIB covered
Liability coverage and workplace insurance in force on every property we set foot on.
Catch it early
Signs your roof needs repair now, not next spring.
Most of the expensive jobs we quote started as a fifteen-minute repair that waited two winters.
- Shingles missing or lifted after a wind event
- Water staining on a ceiling or down an interior wall
- Granules collecting in the eavestrough or at downspout outlets
- Daylight visible through the attic sheathing
- Standing water on a flat roof more than 48 hours after rain
- Rust, gaps or lifted metal at chimney and skylight flashing
- Attic sheathing that looks dark, stained or feels soft underfoot
Straight answers
What Richmond Hill homeowners ask us most.
Answers from the roof, not from a brochure.
What is the most common roof repair in Richmond Hill?
Shingle blow-off. Richmond Hill's newer subdivisions sit on open, elevated ground with very little mature tree cover, so wind hits the roof planes directly. We replace missing and lifted shingle courses more than any other single repair, usually along ridge lines and the windward slope.
Why do shingles blow off so easily on newer homes?
Two reasons, usually together. Production roofing on new builds moves fast, and nails placed high or overdriven miss the shingle's nailing strip, so the tab is held by adhesive alone. Second, the self-seal strip needs warm weather to bond — shingles installed late in the season may never fully seal before their first winter. Once a tab lifts, wind gets underneath and the failure spreads along the course.
Can one or two missing shingles really cause a leak?
Yes. The shingle is the wear layer; the underlayment beneath it was never designed for prolonged direct exposure. Once it degrades, water reaches the plywood and travels laterally before it appears inside. A single exposed area is enough to stain a ceiling and start rot in the sheathing.
What happens if I leave a small roof repair?
The cost curve is steep. A shingle repair is a short visit. Once water sits in the sheathing through a freeze-thaw cycle, the plywood delaminates and has to be cut out and replaced — which means stripping and rebuilding that section of roof, not patching it. Add insulation replacement and drywall, and a minor repair becomes a four-figure job.
How does a thermal roof inspection work?
Wet insulation retains heat longer than dry insulation. Scanning the roof as surface temperatures fall makes saturated areas appear as clearly defined warm zones on the infrared image. It maps the extent of moisture below the surface, which visual inspection cannot do, and it distinguishes an actual roof breach from interior condensation caused by a ventilation problem.
Should I repair my roof or replace it?
It depends on the failure pattern, not the roof's age. Isolated damage on an otherwise sound roof — a wind-lifted course, one failed flashing detail, a split seam — is a repair, even on an older roof. Replacement is warranted when failures appear in multiple unrelated locations at once, when the sheathing has lost structural integrity, or when the membrane has shrunk past the point where new material will bond. We tell you which one you have and why.
Do you offer emergency roof repair?
Yes. For active leaks and storm damage in Richmond Hill we respond the same day where conditions allow, secure the roof to stop water entry, and schedule the permanent repair once the surface is dry enough to bond properly.
How often should a roof be inspected?
Once a year, in spring or fall, plus after any major wind or hail event. Spring inspections catch damage from ice damming and freeze-thaw movement; fall inspections catch anything that would turn into a winter emergency.
Do you work outside Richmond Hill?
Richmond Hill is our home city and it gets priority, including on emergency calls. We do take work in neighbouring communities, but the depth of local knowledge is here — we know which subdivisions have which roof systems and how each one typically fails. Call and we'll tell you straight whether we're the right crew for your address.
Recent work
Repairs completed across Richmond Hill.
Where we work
Richmond Hill, neighbourhood by neighbourhood.
From Oak Ridges down to Langstaff, Bathurst across to Leslie — and neighbouring communities on request.
- Oak Ridges
- Jefferson
- Mill Pond
- Bayview Hill
- North Richvale
- South Richvale
- Devonsleigh
- Observatory
- Crosby
- Rouge Woods
- Westbrook
- Elgin Mills
- Doncrest
- Headford
- Langstaff
- Beverley Acres
Next step
Have a leak? Let's find where it's actually coming from.
Book an inspection and we'll scan the roof, show you the source, and give you a written price before anything gets touched.




